2015 Nissan Sentra Blend Door Actuator Location

Are you trying to locate the 2015 Nissan Sentra Blend Door Actuator? Look no further! This article has the most accurate and detailed information available.


The 2015 Nissan Sentra Blend Door Actuator is located in the driver side dash on the left side of the steering column. It is connected to the blend door motor and the temperature blend door. It is responsible for controlling the temperature of the air coming in through the HVAC.


If you are experiencing problems with the temperature of your vehicle, it is likely that the blend door actuator has gone bad. It can be replaced easily and cheaply. It is not necessary to replace the entire blend door motor or the temperature blend door.

To get to the blend door actuator, simply remove the screws that secure the driver side dash. Then, remove the actuator from the blend door motor and the temperature blend door. Once the actuator has been removed, you can replace it with a new one.

2014 Nissan Sentra Blend Door Function

2015 Nissan Sentra Blend Door Actuator Location. The mix/blend door actuator is reached by removing the glove box trim strip on the right, then remove the screws around the glove box, disconnect the wire connector and. 2015 Nissan Sentra Air Intake Box Actuator Part Number: 27730-1KM0A Vehicle Specific Other Name: ACTUATOR-Air Intake Box; Actuator $27.89 MSRP: $37.18 You Save: $.

This is footage of my 2014 Nissan Sentra blend door functionality when switching the control from COLD to HOT. I removed the lower driver floor ducting to give better visibility (3 torx screws).

Share this post